PT100 resistance thermometer
Three-wire PT100 in a Ø6 316L sheath, −50 to 200 °C, for the accuracy a thermocouple cannot hold.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A platinum resistance element wound and potted into a stainless sheath, wired three-wire to cancel lead resistance. Where a K-type drifts by tens of degrees over a year, this stays inside a few tenths.
Specifications
| Element | PT100, class A or class B |
|---|---|
| Range | −50 to +200 °C (400 °C on request) |
| Sheath | Ø6 mm, 316L SS |
| Wiring | 3-wire (4-wire optional) |
| Process connection | G1/2 or M20 × 1.5 |
| Head | IP65 aluminium or 304 SS |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Ice-point check certificate available
- Element spring-loaded against the sheath tip for fast response
- Compatible with the TT-30 head transmitter
Options
- Sanitary clamp connection
- Thermowell matched to the probe
- 4-wire element for laboratory accuracy
Typical applications
- Water, oil and glycol temperature in tanks and pipes
- Food and pharmaceutical lines needing a stable element
- Chiller and HVAC plant monitoring
More in Temperature
Same family, same quotation process. Open a product to compare parameters side by side.
K-type thermocouple assembly
Ø6 mm 304 sheath, 0–1100 °C, fixed thread and 2 m lead — the assembly local factories make by the thousand.
Bimetallic thermometer, Ø100
No power, no wiring: a bimetal coil in a stainless stem, −20 to 150 °C, read straight off the dial.
Head-mount temperature transmitter
Fits inside a standard connection head: PT100 or thermocouple in, 4–20 mA out, HART optional.