Bimetallic thermometer, Ø100
No power, no wiring: a bimetal coil in a stainless stem, −20 to 150 °C, read straight off the dial.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A bimetal helix inside a stainless stem drives a pointer through a sealed gland. It is the thermometer specified when a plant wants a reading without a loop, a battery or a calibration sheet.
Specifications
| Range | −20 to +150 °C (up to 500 °C optional) |
|---|---|
| Accuracy | ±1.5 % FS |
| Dial | Ø100 mm, adjustable angle |
| Stem | Ø6 or Ø8 mm, 304 SS, length to order |
| Connection | G1/2 fixed or sliding thread |
| Protection | IP65 |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Dial rotates to a readable angle after installation
- Everyday-angle version for horizontal pipes
- Stem length cut to the pipe or tank depth
Options
- Thermowell with G1/2 or flange
- Stainless case for coastal and washdown sites
- Coloured set-point hands
Typical applications
- Pipe and tank temperature where no signal is needed
- Cooling towers and heat exchangers
- Field check of a transmitter reading
More in Temperature
Same family, same quotation process. Open a product to compare parameters side by side.
K-type thermocouple assembly
Ø6 mm 304 sheath, 0–1100 °C, fixed thread and 2 m lead — the assembly local factories make by the thousand.
PT100 resistance thermometer
Three-wire PT100 in a Ø6 316L sheath, −50 to 200 °C, for the accuracy a thermocouple cannot hold.
Head-mount temperature transmitter
Fits inside a standard connection head: PT100 or thermocouple in, 4–20 mA out, HART optional.