Bourdon tube pressure gauge, Ø100
The general-purpose gauge most lines are still specified with: dry or liquid-filled case, 0–40 bar.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A drawn-steel case Bourdon gauge built by local instrument factories for water, air, steam and non-corrosive process fluids. The movement is brass, the tube is phosphor bronze, and the dial can be printed with your unit, dual scale or logo.
Specifications
| Range | 0–1 bar up to 0–40 bar |
|---|---|
| Accuracy | ±1.6 % FS |
| Dial | Ø100 mm, black on white aluminium |
| Connection | G1/2 BSP male, brass or 304 SS |
| Wetted parts | Phosphor bronze tube, brass socket |
| Protection | IP54, glycerine filling on request |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Case vented for steam service, plug supplied loose in the carton
- Dual scale bar / psi or MPa / psi printed to order
- Adjustable pointer for field zeroing without opening the case
Options
- Glycerine or silicone filling for vibration
- 304 or 316L stainless case and socket
- Panel clamp, U-clamp or bottom/back connection
Typical applications
- Pump discharge and filter differential indication
- Water, air and steam headers in utilities
- Tank and skid panels where a transmitter is not justified
More in Pressure
Same family, same quotation process. Open a product to compare parameters side by side.
Process pressure gauge, Ø150
Large dial, all-stainless wetted parts, ±1.0 % FS — for operators who read it from the walkway.
Pressure transmitter, 4–20 mA
Piezoresistive transmitter with a 316L diaphragm; 0–16 bar, two-wire, HART on request.
Differential pressure transmitter
Two-port DP cell for filter monitoring and flow by orifice; 0–250 kPa, square-root output available.