Differential pressure transmitter
Two-port DP cell for filter monitoring and flow by orifice; 0–250 kPa, square-root output available.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A capacitive differential cell with a 316L diaphragm pair and a compact 4–20 mA electronics board. Used with an orifice plate it becomes a flow transmitter; used across a filter it becomes a fouling alarm.
Specifications
| Range | 0–2 kPa up to 0–2.5 MPa |
|---|---|
| Static pressure | up to 16 MPa |
| Accuracy | ±0.5 % FS |
| Output | 4–20 mA, square-root selectable |
| Connection | 1/4 NPT female, 316L |
| Protection | IP65 |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Three-valve manifold available as a matched set
- Square-root extraction switchable in the field
- Zero drift trimmed at line static pressure
Options
- Five-valve manifold, 316 SS
- Remote diaphragm seals
- LCD display with mA and percentage
Typical applications
- Filter and strainer differential alarm
- Orifice-plate flow measurement
- Tank level by hydrostatic difference
More in Pressure
Same family, same quotation process. Open a product to compare parameters side by side.
Bourdon tube pressure gauge, Ø100
The general-purpose gauge most lines are still specified with: dry or liquid-filled case, 0–40 bar.
Process pressure gauge, Ø150
Large dial, all-stainless wetted parts, ±1.0 % FS — for operators who read it from the walkway.
Pressure transmitter, 4–20 mA
Piezoresistive transmitter with a 316L diaphragm; 0–16 bar, two-wire, HART on request.