Instrument junction box, 304 SS
IP66 enclosure with 24 terminals, cable glands and a mounting plate; the box at the end of the cable run.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A 304 stainless enclosure sized for 24 terminals with a DIN rail, earth bar and gland plate. Assembled locally with the terminal count and gland sizes you specify, then tested for continuity.
Specifications
| Enclosure | 304 SS, 300 × 200 × 120 mm |
|---|---|
| Protection | IP66 |
| Terminals | 24 × 2.5 mm², screw clamp |
| Glands | M20 / M25, nickel-plated brass |
| Mounting | wall bracket or floor stand |
| Finish | brushed, or powder coat RAL 7035 |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Earth bar bonded to the enclosure
- Terminal numbering strip inside the lid
- Gland plate drilled to the cable schedule
Options
- 316L body for coastal sites
- Ex e version
- Pre-wired with a numbered ferrule set
Typical applications
- Field termination of instrument cables
- Multi-sensor skids and analyser houses
- Outdoor marshalling points
More in Electrical & test
Same family, same quotation process. Open a product to compare parameters side by side.
Digital multimeter, 600 V CAT III
True-RMS meter with a 4–20 mA range, continuity and a backlit display — bench to field.
Insulation resistance tester, 5 kV
250 V to 5 kV test voltages with PI and DAR — the cable test before energising.